5.4 Device status menu group
5.4.1 Status monitoring
In this menu you can read information about the actual system status. Status information is read
from the device and refreshed automatically only when connected through USB.
When connected remotely, you can read and refresh the status information by clicking on the
“Read” button.
The system logs are shown in the window on the right hand side, which provides information
about the internal processes of the device and communication. The system logs help
troubleshooting if malfunction occurs. The program saves the system logs to file automatically in
the “Logs” folder, which you can access easily by clicking on the path link shown in the “About”
menu in the “Data folder” section (the file name looks as follows: “the actual date_module.log”).
The system logs are only available when connected via USB!
To Next Page
