➢ Remote access settings:
User: using the drop-down menu, you can select the super admin or admin user, for whom you
want to configure the remote access password.
Password / Confirm password: in this section you can configure and confirm the remote
access password. The password configured here, and the given user’s username will be
required in the “Connection type” menu, in the “Remote access” section, for connecting
remotely to the device.
Comment: in this section you can write a custom comment for the given remote access.
➢ Remote access levels:
With Super admin role: Full access, can access all settings.
With Admin role: Has permission to manage users only, therefore, has no
access to menus included in the “Device settings” menu
group.
With User role: Has no remote access permission, cannot access
anything, therefore it makes no sense to configure remote
access for normal users.
You can configure the user roles in the user settings, using the “Role” drop-down menu.
➢ Configuring a new remote access:
• If you haven’t read the settings and the users from the device yet, click on the
“Read users” button in the “Users” menu.
• Click on the “Add new” button.
• Select the user from the “User” drop-down menu, whom you want to grant remote access.
• Configure the remote access password in the “Password” and the “Confirm password”
fields.
• You can write a comment in the “Comment” field, if needed.
• Click on the “OK” button.
• Click on the “Write users” button.
To Next Page
