tell Gate Control BASE 1000 - Page 56

56
The available SMS commands are summarized in the table below. You can find the detailed
specification of the commands below the table. The Super admin can use all available
commands, while the Admin is authorized to use only commands related to user management
(these are marked separately in the table).
Action
SMS command
Quick registration of the Super admin user
SUPERADMIN#
SUPERADMIN=USERNAME,COMMENT,
REMOTE ACCESS PASSWORD#
New user registration with detailed configuration
(also available with Admin role)
n=PHONE NUMBER,USERNAME,
COMMENT,ROLE,ENTRY PERIOD,OUTPUT#
Deleting a user
(also available with Admin role)
d=USERNAME#
d=PHONE NUMBER#
Deleting all users
(also available with Admin role)
ERASEALLUSERS#
Configuring the permitted entry period
EP=FROM,TO#
Configuring the output control mode
M=1,A=1,B=1#
M=2,A=1,B=1#
M=3,X=1,Y=1,W=15,Z=1,O=1#
M=4,X=1,Y=1,Z=1,O=1#
M=5,X=1,Z=1#
Configuring the contact inputs
I1=INPUT TYPE,SENSITIVITY#
I2=INPUT TYPE,SENSITIVITY#
I3=INPUT TYPE,SENSITIVITY#
I4=INPUT TYPE,SENSITIVITY#
Configuring phone numbers for SMS / call-based
notification
T1=PHONE NUMBER#
T2=PHONE NUMBER#
T3=PHONE NUMBER#
T4=PHONE NUMBER#
Associating SMS message text with inputs
S1=MESSAGE TEXT#
S2=MESSAGE TEXT#
S3=MESSAGE TEXT#
S4=MESSAGE TEXT#
Configuring the SMS forwarding phone number
SF=PHONE NUMBER#
Configuring the device phone number
MT=PHONE NUMBER#
Restoring the USB password to factory default
PWRESET#
Initiating a cloud connection
(also available with Admin role)
CONNECT#
Configuring the APN
APN=APN#
Configuring the APN with related username and
password
APN=APN,username,password#
Setting the system time
(Can be sent from any phone number)
#DT