Telpo TP-8S User Manual

Telpo TP-8/16/24/32/64S Voice Gateway
User Manual
Telepower Communication Co., Ltd.
Tel: +86 0757-86299753
website: www.telpouc.com
Email:
telpouc@telpo.com
Fax: +86 0757-86337898-770
Address: Room 201,Building A5, Hantian technology park, Foshan City, Guangdong, China
Latest revision:
2017-9-10
Revision No.:
V1.2

Telpo TP-8S Specifications

General

Memory	2GB RAM, 16GB ROM
Display	5.5-inch IPS
Wi-Fi	802.11 a/b/g/n
Power	5V/2A
Connectivity	4G/3G/2G
Supported Bands	GSM: B2/B3/B5/B8, WCDMA: B1/B2/B5/B8, FDD-LTE: B1/B3/B5/B7/B8/B20, TDD-LTE: B38/B40/B41
Resolution	1280 x 720 pixels

Summary

Operation Safety Rules

Chapter II Product Installation

2.1 Installation Preparation

2.1.1 Open-box Inspection

2.1.2 Installation Precautions

2.2 Device Fixing

2.2.1 Cabinet-type Fixing

2.2.2 Plan Fixing

2.3 Cable Connection

2. Cascade connection

Chapter III Rapid Configuration

3.1 Preparation before Configuration

Lists prerequisites like network access method and SIP server details.

3.2 Cable Connecting

Guides on connecting power, network cables, PC, and telephones.

3.3 PC's IP Address Modification

3.4 Voice gateway Gateway Login

3.5 Voice gateway Network Settings

WAN Settings

Guides on configuring network access methods: DHCP, PPPoE, or Static IP.

3.6 SIP Server Parameters Setting

3.7 SIP Account and Password Setting

Explains the need to set account and security password for each port.

3.10 Telnet Login

3.11 HyperTerminal Login

Chapter IV Detailed Configuration

4.2 Network Settings

4.2.1 WAN Setting

Details configuring WAN access via DHCP, PPPoE, or Static IP with DNS settings.

4.2.2 LAN Setting

4.2.3 NAT Settings

4.2.4 Vlan Settings

4.3 SIP Settings

Covers SIP parameters, including basic, advanced, and black/white list settings.

4.3.1 Basic Settings

4.3.2 Advanced Settings

4.3.3 Black And White List

4.4 Port Settings

Covers basic, register, voice/fax, advanced, and group settings for ports.

4.4.1 Basic Settings

4.4.4 Advanced Settings

4.5 Dialing Routing Settings

4.5.1 SIP Digit Map

Defines digit maps for call routing, including speed dialing and number matching.

4.5.2 Prior Digit Map

4.6 Global Parameter Settings

4.6.1 DSP Settings

Configures Digital Signal Processor parameters for voice quality and features.

4.6.2 SLIC settings

4.6.3 Timers

5.2 Firewall Settings

5.2.1 Security Settings

Configures security filters like IP addresses and port ranges for access control.

5.2.2 Port Settings

5.3 System Maintenance

Covers system maintenance tasks like user management, software updates, and backups.

5.3.1 User Management

5.3.2 Software Updata

Provides instructions for updating the gateway's software via HTTP.

5.3.3 Config Backup

5.3.4 Default Settings

Restores the device to its factory default settings, excluding network configuration.

6.1.1 Command Line Entry

6.1.3 Command Classification and Command Format

6.2 Detailed Explanations for Voice Command Usage

6.2.1 Compressed Chip Setting Command Set

6.2.2 Network Parameter Setting Command Set

6.2.3 Protocol-related Parameter Setting Command Set

6.2.4 System Parameter Settings and System Tool Command Set

6.2.9 SNMP-related Parameter Setting Command Set