103
This check box will enable and
disable SMS status function.
SMS status is disabled by default.
SMS text which will send
routers status.
SMS text can contain letters, numbers, spaces and
special symbols. Capital letters also matters.
What kind of authorization to
use for SIM management.
No authorization, by serial or by router admin
password.
From all numbers, from group or from single number.
Which status information
should be included in SMS:
Data state, Operator,
Connection type, Signal
Strength, Connection State, IP
You can select which status elements to display.
This check box will enable and
disable this function.
Allows to get OpenVPNās status via SMS.
The action to be performed
when this rule is met.
SMS text which will send
OpenVPN status.
SMS text can contain letters, numbers, spaces and
special symbols. Capital letters also matters.
What kind of authorization to
use for SIM management.
No authorization, by serial or by router admin
password.
From all numbers, from group or from single number.
This check box will enable and
disable this function.
Allows Wi-Fi control via SMS.
The action to be performed
when this rule is met.
SMS text which will turn Wi-Fi
ON/OFF.
SMS text can contain letters, numbers, spaces and
special symbols. Capital letters also matters.
What kind of authorization to
use for SIM management.
No authorization, by serial or by router admin
password.
From all numbers, from group or from single number.
Permanently saves Wi-Fi state.
With this setting enabled, router will keep Wi-Fi state
even after reboot.
If it is not selected, router will revert Wi-Fi state after
reboot.
Switch mobile data
on/off
This check box will enable and
disable this function.
Allows mobile control via SMS.
The action to be performed
when this rule is met.
SMS text which will turn mobile
data ON/OFF.
SMS text can contain letters, numbers, spaces and
special symbols. Capital letters also matters.
What kind of authorization to
use for SIM management.
No authorization, by serial or by router admin
password.
From all numbers, from group or from single number.
Permanently saves mobile
network state.
With this setting enabled, router will keep mobile
state even after reboot.