123
9.10 Hotspot
Wireless hotspot provides essential functionality for managing an open access wireless network. In
addition to standard RADIUS server authentication there is also the ability to gather and upload detailed logs on
what each device (denoted as a MAC address) was doing on the network (what sites were traversed, etc.).
9.10.1 General settings
9.10.1.1 Main settings
Check this flag to enable hotspot functionality on the router.
Access Point IP address. This will be the address of the router on the hotspot network. The
router will automatically create a network according to its own IP and the CIDR number
that you specify after the slash. E.g. “192.168.2.254/24” means that the router will create
a network with the IP address 192.168.182.0, netmask 255.255.255.0 for the express
purpose of containing all the wireless clients. Such a network will be able to have 253
clients (their IP addresses will be automatically granted to them and will range from
192.168.2.1 to 192.168.2.253).
Authentication mode: External radius
The IP address of the RADIUS server that is to be used for Authenticating your wireless
clients.
To Next Page
Loading...
Need help?
General
