107
Force Config update
from server
This check box will enable and
disable this function.
Allows to upgrade router‘s Config via SMS.
The action to be performed
when this rule is met.
Router will reboot after this rule is executed.
SMS text which will force router
to upgrade configuration from
server.
SMS text can contain letters, numbers, spaces and
special symbols. Capital letters also matters.
What kind of authorization to
use for SIM management.
No authorization, by serial or by router admin
password.
From all numbers, from group or from single number.
This check box will enable and
disable this function.
Allows monitoring control via SMS.
The action to be performed
when this rule is met.
Turn monitoring ON or OFF.
SMS text which will turn
monitoring ON/OFF
SMS text can contain letters, numbers, spaces and
special symbols. Capital letters also matters.
What kind of authorization to
use for SIM management.
By serial or by router admin password.
From all uers, from group or from single number.
Important Notes:
3G settings must be configured correctly. If SIM card has PIN number you must enter it at “Network” > “3G”
settings. Otherwise SMS reboot function will not work.
Sender phone number must contain country code. You can check sender phone number format by reading
the details of old SMS text massages you receiving usually.
9.7.2 Call Utilities
Allow users to call to the router in order to perform one of the actions: Reboot, Get Status, turn Wi-Fi ON/OFF,
turn Mobile data ON/OFF. Only thing that is needed is to call routers SIM card number from allowed phone (user) and
RUT9 will perform all actions that are assigned for this particular number. To configure new action on call rules you just
need to click the Add button in the „New Call rule” section. After that, you get in to the “Modify Call Rule section”.
To Next Page
Loading...
Need help?
General
