Concurrent Dual Band Wireless N600 Gigabit Router
4.3.4 MAC Address Filter
To better manage PCs in LAN, you can use the MAC Address Filter function to
allow/disallow such PCs to access to Internet.
Click “Add” to display page below:
Filter Mode: Select Deny or Allow according to your own needs.
Deny Access to Internet: Disallow specified packets to pass through the router;
other packets are processed according to default rule.
Allow Access to Internet: Allow specified packets to pass through the router;
other packets are processed according to default rule.
Description: Briefly describe a new filter rule
MAC: Enter the computer’s MAC address that you want to filter out in the MAC
address field or select one from the MAC address list.
Time: Select a time range for the new MAC address filter rule to take effect. The
default is 00:00-00:00, which means 24 hours.
Day: select a day or several days for the new MAC address filter rule to take
effect.
For Example: To only prevent a PC at the MAC address of 00:B0:0C:77:88:00 from
accessing Internet from 8:00 to 18：00 everyday, without restricting other PCs,
config same settings on the screenshot below on your device:
30
To Next Page
Loading...
Need help?
General
