Concurrent Dual Band Wireless N600 Gigabit Router
4.8.4 Restore to Factory Default Settings
To restore all settings to the device's factory default values, click the "Restore to
Factory Default” button:
Factory Default Settings:
User Name: admin
Password: admin
IP Address: 192.168.0.1
Subnet Mask: 255.255.255.0
Note: To activate your settings, you need to reboot the device after you reset it.
4.8.5 Change Password/User Name
This section allows you to change login password and user name for accessing
device’s Web-based interface.
¾ Old Password/User Name: Enter the old password/user name.
¾ New Password/User Name: Enter a new password/user name.
¾ Confirm New Password: Re-enter the new password for confirmation.
¾ Save: Click it to save new settings.
NOTE: For the sake of security, it is highly recommended that you change default
login password and user name.
63
To Next Page
Loading...
