Tenda N60 User Manual

Concurrent Dual Band Wireless N600 Gigabit Router
Note:
Setting WAN port hereon to the same value as that on WAN access control section
will deactivate the virtual server feature.
4.4.2 DMZ Settings
In some cases, we need to set a computer to be completely exposed to extranet for
implementation of a bidirectional communication. To do so, we set it as a DMZ
host.
 DMZ Host IP Address: Enter the IP address of a LAN computer which you want
to set to a DMZ host.
 Enable: Check/uncheck to enable/disable the DMZ host.
NOTE:
1. If you set a PC to a DMZ host, it will be completely exposed to extranet and gains
no more protection from the device firewall.
2. A WAN user accesses the DMZ host through a corresponding WAN IP address.
4.4.3 UPnP Settings
UPnP (Universal Plug and Play) requires Windows ME/Windows XP or later or
application softwares that support such UPnP feature.
34

Tenda N60 Specifications

General

Wireless Standards	IEEE 802.11a/b/g/n
Frequency Band	2.4 GHz
Wireless Speed	300 Mbps
Antenna	External
Wired Speed	10/100 Mbps
Antenna Count	2
Ports	1 x 10/100Mbps WAN port, 3 x 10/100Mbps LAN ports
Security	WPA/WPA2