Tenda N60 - Page 33

Concurrent Dual Band Wireless N600 Gigabit Router
Click “Add” to display below page.
 WAN Port: Enter the WAN service port.
 Well-Known Service Ports: The “Well-Known Service Port” lists commonly used
protocol ports such as DNS（53, FTP（21）, GOPHER(70), HTTP(80), NNTP(1190),
POP3(110), PPTP(1723) , SMTP(25), SOCK(1080), TELNET(23). In case that you
don’t find the port ID you need, add it manually.
 LAN Port: Enter LAN service port.
 LAN IP: The IP address of a computer used as a server in LAN.
 Protocol: Includes TCP, UDP and Both. Select “Both” if you are not sure about
which protocol to use.
 Enable: Check the “Enable” option to activate corresponding entry.
For example: If you create a web server using port 80 on a LAN PC at the IP address
of 192.168.0.10, and you want WAN users to access such server via
http://x.x.x.x:4000 (x.x.x.x represents router’s WAN IP address), then do as follows:
1. Enter “4000” in WAN Port field, 80 in LAN port field and 192.168.0.10 in Private IP
field,
2. Select “Both” from protocol drop-down list.
3. Check the “Enable” box.
4. Click “Save” to save such settings.
33