Tenda N60 - Routing; Routing Table; Static Routing

Concurrent Dual Band Wireless N600 Gigabit Router
 Enable DDNS: Check the box to Enable or Disable the DDNS feature.
 DDNS Service Provider: Select your DDNS service provider from the
drop-down menu (Dyndns or Noip).
 Username: Enter the DDNS username registered on DDNS server.
 Password: Enter the DDNS password registered on DDNS server.
 Domain Name: Enter the DDNS domain name distributed by your DDNS
service provider.
 Connection Status: Displays current status connection with the DDNS server.
4.4.5 Routing
This section talks about Routing Table and Static Routing features.
Routing Table
This page displays the router’s core routing table which lists destination IP, subnet
mask, gateway, hop count and interface.
Static Routing
You can use this section to set up router’s static routing feature.
Click “Add” to add static routing entries.
36