Document version: V1.0
9
Set up a PPPoE connection
If your ISP provides the PPPoE user name, password, and other related parameters (if any), you can
set up a PPPoE connection.
Step 1
Log in to the web UI of the ONT.
Step 2
Navigate to WAN > WAN > PON WAN.
Step 3
Set Channel Mode to PPPoE.
Step 4
Choose an IP Protocol in the drop-down list.
Step 5
Set other common WAN parameters as required by your ISP.
Step 6
Enter the PPPoE UserName and Password provided by your ISP in PPP Settings.
Step 7
(Optional) If you set IP Protocol to IPv6 or IPv4/IPv6, enter required parameters in IPv6
WAN Setting.
Step 8
Click Apply Changes.
---End
After the configuration is completed, you can access the internet through the LAN port of the ONT,
or by connecting a router (connection type: DHCP/dynamic IP) to a LAN port of the ONT.
To Next Page
Loading...