Tenda XPON ONT HG1 - Backup;Restore

Document version: V1.0
66
10.4 Backup/Restore
On this page, you can back up the configuration of the ONT, restore the configuration from a
backup file, and reset the ONT.
To access the page, log in to the web UI of the ONT and navigate to Admin > Admin >
Backup/Restore.
10.4.1 Back up the configuration of the ONT
You can back up the configuration of the ONT at a certain time for future restoration after you
change the settings or reset the ONT.
Procedure:
Step 1
Log in to the web UI of the ONT.
Step 2
Navigate to Admin > Admin > Backup/Restore.
Step 3
Click Backup….
The configuration file (config.xml) is automatically downloaded to the local host.
---End
10.4.2 Restore previous configuration of the ONT
You can restore the previous configuration of the ONT using the backup file that you have
downloaded.
Procedure:
Step 1
Log in to the web UI of the ONT.
Step 2
Navigate to Admin > Admin > Backup/Restore.
Step 3
Click Choose File, and select the configuration file.