Tenda XPON ONT HG1 - Diagnostics; Ping and Tracert

Document version: V1.0
59
9 Diagnostics
9.1 Ping and Tracert
The ONT provides connectivity diagnosis tools, which include Ping and Tracert. You can use these
tools to test the connectivity to the internet, a certain IP address or domain name.
−
Ping: It is a utility that helps to check if an IP address or domain name is accessible or
not. Ping works by sending a packet to the specified address and waits for the reply. It
also measures round trip time and reports errors.
−
Tracert: It is a utility that traces a packet from your computer to the host, and will
also show the number of steps (hops) required to reach there, along with the time by
each step.
To access the page, log in to the web UI of the ONT and click Diagnostics. Both tools include IPv4
(Ping/Tracert) and IPv6 (Ping6/Tracert6) versions. The IPv4 version is used for illustration.
Ping
Parameter description
Parameter
Description
Host Address
Specifies the IP address or domain name whose connectivity with the ONT is to be
diagnosed.
WAN Interface
Specifies the WAN interface through which the packet for diagnosis is forwarded.
Tracert