Tenda XPON ONT HG1 - LAN; LAN IPv4 settings

Document version: V1.0
23
5 LAN
In this module, you can configure the LAN IPv4 settings of the ONT.
To access the page, log in to the web UI and navigate to LAN > LAN > LAN Interface Settings.
Parameter description
Parameter
Description
InterfaceName
Specifies the LAN interface name of the ONT.
IP Address
Specifies the IPv4 LAN address of the ONT, which is also the IPv4 address for logging in
to the web UI of the ONT.
Subnet Mask
Specifies the IPv4 LAN subnet mask of the ONT.