Tenda XPON ONT HG1 - View PON status

Document version: V1.0
22
4.3 View PON status
On this page, you can view the PON status and GPON/EPON connection status of the ONT.
To access the page, log in to the web UI of the ONT and navigate to Status > Status > PON.
Parameter description
Parameter
Description
PON Status
Vendor Name
Specifies the vendor name of the ONT.
Temperature
Specifies the current chip temperature of the ONT.
Voltage
Specifies the current voltage of the optical module of the ONT.
Tx Power
Specify the transmitted and received optical power of the ONT over the
PON port.
Rx Power
Bias Current
Specifies the current bias current of the optical module of the ONT.
GPON Status
ONU State
Specifies the state of the ONT, ranging from O1 to O7.
⚫
O1 to O4: The ONT is registering.
⚫
O5: The ONT is registered successfully and is under normal operation.
⚫
O6/O7: The ONT is in the abnormal state and stops transmitting signals.