Tenda XPON ONT HG1 - Time zone

Document version: V1.0
72
10.8 Time zone
On this page, you can change the system time of the ONT, or enable the ONT to update its system
time with the Simple Network Time Protocol (SNTP) server.
To access the page, log in to the web UI of the ONT and navigate to Admin > Admin > Time Zone.
Parameter description
Parameter
Description
Current Time
Specifies the current system time of the ONT. You can change it manually.
Time Zone Select
Specifies the time zone where the ONT locates.
Enable Daylight
Saving Time
Daylight Saving Time (DST) is the practice of advancing clocks during warmer months so
that darkness falls later each day according to the clock.
With it is enabled, the ONT sets the time forward by one hour in the spring ("spring
forward") and sets the time back by one hour in autumn ("fall back") to return to standard
time. In other words, there is one 23-hour day in late winter or early spring and one 25-
hour day in the autumn.
Enable SNTP
Client Update
Specifies whether to enable automatic update of system time through synchronization
with SNTP server.
The SNTP is a time synchronization protocol of the TCP/IP protocol family. It is based on
the connectionless User Datagram Protocol (UDP) and can be used on all supporting
devices to synchronize system time in IP networks.
WAN Interface
Specifies the interface through which the ONT updates its system time with the SNTP
server.
SNTP Server
You can choose a preset SNTP server, or manually set the IP address for updating system
time.