Document version: V1.0
24
6
WAN
After you have registered the ONT successfully, you can set up the WAN connection.
To access the configuration page, log in to the web UI of the ONT and navigate to WAN > WAN >
PON WAN. Required settings for WAN connections differ with the channel modes, connection
types and IP protocols that you choose.
6.1
Common WAN settings
This part shows the common settings in all types of WAN connections.
Parameter description
Specifies the WAN connection name which you set up.
You can add multiple WAN connections by clicking the drop-down list and choose new
link. After configuring required parameters, you can click Apply Changes to save the
connections.
This parameter is generated automatically after you create a new link and cannot be
customized. A maximum of eight links can be created here.
If the WAN connection you want to set up includes VLAN information, you can select
Enable VLAN and set the VLAN ID as required.
To Next Page
Loading...