Document version: V1.0
28
6.4
PPP settings
You can configure the PPPoE parameters to access the internet in this part.
When Channel Mode is set to PPPoE, these parameters are required.
Parameter description
Specify the PPPoE user name and password for settings up the WAN connection.
Specifies the PPPoE connection type.
⚫
Continuous: The ONT keeps connected to the internet.
⚫
Connect on Demand: The ONT disconnects from the internet after a certain period
and establishes the connection as soon as you attempt to access the internet.
⚫
Manual: Users should manually connect and disconnect the network connection.
Specifies the PPPoE service name used by the PPPoE server to verify the legitimacy of
the ONT.
If your ISP did not provide a service name, leave this field blank. Otherwise, a dial failure
may occur.
To Next Page
Loading...