Tenda XPON ONT HG1 - View IPv6 status

Document version: V1.0
21
4.2 View IPv6 status
On this page, you can view the IPv6 connection status of the ONT.
To access the page, log in to the web UI of the ONT and navigate to Status > Status > IPv6.
Parameter description
Parameter
Description
LAN
Configuration
IPv6 Address
Specifies the LAN IPv6 address of the ONT.
IPv6 Link-Local
Address
Specifies the IPv6 link-local address of the ONT.
A link-local address is an IPv6 unicast address that is automatically
configured on any interface and is valid only for communications
within the network segment.
Prefix Delegation
Prefix
Specifies the IPv6 prefix of the LAN port of ONT.
WAN
Configuration
Interface
Specifies the name of the interface/WAN when IPv6 is enabled.
VLAN ID
Specifies the VLAN ID of the WAN connection.
Connection Type
Specifies the WAN connection type.
Protocol
Specifies the channel mode used by the WAN port.
IP Address
Specifies the IP address that the ONT obtains after you set up a WAN
connection successfully.
Status
Specifies the connection status of the WAN connection.
⚫
up: The WAN connection is successful.
⚫
down: The WAN connection failed and is currently unavailable.