Tenda XPON ONT HG1 - Page 26

Document version: V1.0
20
Parameter description
Parameter
Description
System
Specifies the basic system information of the ONT, including the device
name, device type, uptime, software version, hardware version, magic
number, CPU usage, memory usage, and name servers.
LAN
Configuration
IP Address
Specifies the LAN IP address of the ONT, which is also the IP address used
to log in to the web UI of the ONT.
Subnet Mask
Specifies the LAN subnet mask of the ONT.
DHCP Server
Specifies whether to enable the DHCP server of the ONT.
MAC Address
Specifies the MAC address of the ONT’s LAN port.
WAN
Configuration
Interface
Specifies the name of the interface/WAN connection when IPv4 is
enabled.
VLAN ID
Specifies the VLAN ID of the WAN connection.
Connection Type
Specifies the WAN connection type.
Protocol
Specifies the channel mode used by the WAN port.
IP Address
Specify the IP address and gateway address that the ONT obtains after
you set up a WAN connection successfully.
Gateway
Status
Specifies the connection status of the WAN connection.
⚫
up: The WAN connection is successful.
⚫
down: The WAN connection failed and is currently unavailable.