Document version: V1.0
70
10.7
ACL
Access Control List (ACL) is a collection of permitting and denying rules that ensure security by
blocking unauthorized users from and allowing authorized users to access ONT.
To access the page, log in to the web UI of the ONT and navigate to Admin > Admin > ACL.
Parameter description
Specifies whether to enable the ACL function of the ONT.
Specifies the control mode of the rule.
⚫
When Enable is selected, traffic that meets the criteria of the rule can pass through the
specified port of the ONT.
⚫
When Enable is deselected, traffic that meets the criteria of the rule is discarded at the
specified port of the ONT.
Specifies the interface that the access control rule applies to, including LAN and WAN.
⚫
LAN: The ONT checks traffic from the LAN side according to the rule and decides to pass
it or discard it.
⚫
WAN: The ONT checks traffic from the WAN side according to the rule and decides to
pass it or discard it.
Specify the IP address range or a certain IP address that is controlled by the rule.
To Next Page
Loading...