Document version: V1.0
13
◼ Ports, button and jack
Optical fiber port
Used to connect to optical network through a fiber cord.
LAN port
Used to connect to a router, switch or computer.
Reset button
When the PWR LED indicator lights solid on, use an object with a spike to hold
the button down for longer than 10 seconds and release it. All LED indicators light
off several seconds later. When the PWR LED indicator lights solid on again, the
ONT is reset.
Power jack.
Use the included power adapter to connect the device to a power source.
Used to mount the device onto the wall.
Wall-mounting materials are self-prepared. Recommended specifications of the
expansion bolts and screws you may use are as follows:
[Expansion bolt] Inner diameter: 2.4 mm; Length: 26.4 mm.
[Screws] Quantity: 2; Thread diameter: 3 mm; Length: 14 mm; Head diameter:
5.2 mm.
To Next Page
Loading...