Document version: V1.0
34
Step 3
Configure the port forwarding function (refer to port forwarding).
---End
After the configuration is completed, users from the internet can access the FTP server by visiting
“Intranet service application layer protocol name://Domain name”. If the remote port number is
not the same as the default intranet service port number, the accessing address should be:
“Intranet service application layer protocol name://Domain name:Remote port number”.
In this example, the address is ftp://o2849z7222.zicp.vip.
To access the FTP server from the internet with a domain name:
Open the file explorer on a computer that can access the internet, and visit
ftp://o2849z7222.zicp.vip.
Enter the user name and password to access the resources on the FTP server.
To Next Page
Loading...