Tenda XPON ONT HG1 - Page 45

Document version: V1.0
39
To access the configuration page, log in to the web UI of the ONT and navigate to Services >
Firewall > MAC Filtering. The rule added is shown in Current Filter Table.
Parameter description
Parameter
Description
MAC Filtering
Specifies whether to enable the MAC filtering function.
Mode
Specifies the mode of the MAC filtering function.
⚫
Whitelist: Only data packets whose source or destination MAC addresses are
added in the current filter table can access the internet.
⚫
BlackList: Data packets from the LAN whose source or destination MAC
addresses are added in the current filter table cannot pass through the ONT.
Source MAC Address
Specifies the source MAC address of data packets.
You can only enter one source MAC address in one MAC filtering rule.
The MAC address cannot contain any special characters. An example in the
correct format is cc3a61711b6e.
Deny the specified device to access the internet
Scenario: The final exam for your kid is approaching and you want to ban your kid from accessing
the internet on the smartphone.
Goal: Deny certain device of family member to access the internet.
Solution: You can configure the MAC address filter function to reach the goal.
Assume that the MAC address of your kid’s smartphone is 8CEC4BB30493.
Procedure:
Step 1
Log in to the web UI of the ONT.
Step 2
Navigate to Services > Firewall > MAC Filtering.
Step 3
Set MAC Filtering to Enable, and click Apply Changes.
Step 4
Set Mode to BlackList, and click Apply Changes.
Step 5
Set Source MAC Address to 8CEC4BB30493, and click Add.