Document version: V1.0
43
Step 3
Assign a fixed IP address to the host where the server locates.
1.
Navigate to Services > Service > DHCP.
2.
Click MAC-Based Management.
3.
Set MAC Address of the host of the server, which is D4-61-DA-1B-CD-89 in this example.
4.
Set Assigned IP Address for the server host, which is 192.168.1.136 in this example.
5.
Click Assign IP.
---End
After the configuration is completed, users from the internet can access the FTP server by visiting
“Intranet service application layer protocol name://WAN IP address of the ONT”. If the remote port
number is different from the default intranet service port number, the visiting address should be:
“Intranet service application layer protocol name://WAN IP address of the ONT:Remote port
number”. In this example, the address is “ftp://102.33.66.88”. You can find the WAN IP address of
the ONT in Device status.
To access the FTP server from the internet:
Open the file explorer on a computer that can access the internet, and visit ftp://102.33.66.88.
To Next Page
Loading...