EasyManua.ls Logo

Tenda XPON ONT HG1 - Page 53

Tenda XPON ONT HG1
89 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Document version: V1.0
47
Service port: 21
WAN IP address of the router: 102.33.66.88
Please ensure that the router obtains a public IP address public. This function may not work on a host
with an IP address of a private network or an intranet IP address assigned by ISPs that start with 100.
Common IPv4 addresses are classified into class A, class B and class C. Private IP addresses of class A
range from 10.0.0.0 to 10.255.255.255. Private IP addresses of class B range from 172.16.0.0 to
172.31.255.255. Private IP addresses of class C range from 192.168.0.0 to 192.168.255.255.
Procedure:
Step 1
Log in to the web UI of the ONT.
Step 2
Set the server host as the DMZ host.
1.
Navigate to Services > Firewall > DMZ.
2.
Select Enable for DMZ Host.
3.
Enter the IP address of the server host, which is 192.168.1.136 in this example.
4.
Click Apply Changes.
Step 3
Assign a fixed IP address to the host where the server locates.
1.
Navigate to Services > Service > DHCP.
2.
Click MAC-Based Management.
3.
Enter the MAC Address of the host of the server, which is D4-61-DA-1B-CD-89 in this
example.
4.
Enter the assigned IP Address for the server host, which is 192.168.1.136 in this example.
Access using an IP address
FTP server
IP address: 192.168.1.136
WAN IP address:
102.33.66.88
Service port: 21
MAC address: D4:61:DA:1B:CD:89

Related product manuals