Tennant 5280 - Page 13

OPERATION
Tennant 5280 (10–00)
13
3. Turn on machine power switch, and key switch if
equipped (Figure 22).
FIG. 22
4. Lower squeegee to floor with squeegee lever. This
lever will also turn on vacuum system (Figure 23).
FIG. 23
5. Turn solution switch on. The solution will not flow
until control grips are rotated (Figure 24).
FIG. 24
6. Lower scrub brush by stepping down on scrub
head release pedal (Figure 25).
FIG. 25
7. Rotate control grips in either direction and push
machine forward to begin scrubbing. The scrub
brush will assist in propelling the machine forward
(Figure 26).
FIG. 26
WARNING: Flammable materials or
reactive metals can cause explosion or fire.
Do not pick up.
8. Adjust solution flow rate. Turn solution flow knob
counter–clockwise to increase flow or clockwise to
decrease (Figure 27).
FIG. 27