Tennant 5280 - Page 16

OPERATION
Tennant 5280 (10–00)
16
3. Connect wand’s vacuum hose using hose adapter
supplied with wand (Figure 35).
FIG. 35
4. If machine is equipped with Off–Aisle Wand Pump
Option, connect solution hose to quick disconnect
coupler located behind left wheel (Figure 36).
FIG. 36
5. Attach vacuum hose and solution hose to wand
(Figure 37).
FIG. 37
6. Turn machine power and wand pump switch on
(Figure 22).
FIG. 38
7. Lower squeegee to turn on vacuum system
(Figure 39).
FIG. 39
8. Squeeze lever on wand and spray solution on
floor. Scrub floor with brush side of wand and
vacuum up solution with squeegee side of wand
(Figure 40).
WARNING: Flammable materials or
reactive metals can cause explosion or fire.
Do not pick up.
FIG. 40