Teo IP Phone 4101 Installation Instructions
Page 20 13-280135 Rev. K
Some configuration changes only take effect after a phone restart. You may be prompted
to allow a restart before you can proceed with other changes.
Press the
ENTER key to proceed with editing, or press the MENU key to abort
and return to the previous menu.
After exiting Setup Mode, you will be prompted to restart the phone.
Press the
ENTER key to restart the phone immediately, or press the MENU key
to abort and return to the Setup menu.
RESTARTING
PLEASE WAIT...
RESTART REQUIRED
PROCEED?
PLEASE WAIT...
RESTART REQUIRED
PROCEED?
To Next Page
