Introduction
13-280135 Rev. K Page 7
7) DIR Key – displays the Call Directory.
8) CONF Key – adds other parties to a conference call.
9) REDIAL Key – redials the last outgoing number.
10) DROP Key – removes the last party added to a conference call, and disconnects you
from a call and returns new dial tone when not in conference mode.
11) SEND Key – initiates dialing after entering digits.
12) HOLD Key – places a call on hold, and enters a pause in a Speed Dial or Call Directory
dial string.
13) Dial Pad – dials telephone numbers, and sends DTMF tones to external equipment such
as voice mail systems. The dial pad is also used for text and number entry during setup.
14) Multifunction Keys – programmable for use as Speed Dial keys or feature activators.
15) FWD Key – forwards incoming calls to another phone, or may be used to set Presence.
16) DND Key – Do Not Disturb; makes the phone appear busy to incoming callers.
17) VOICE MAIL Key – accesses voice mail services.
18) HEADSET Key – activates the headset.
19) MUTE Key – mutes the microphone when using the speakerphone or handset/headset.
20) SPEAKER Key – activates the speakerphone or Call Monitoring (if enabled by your
installer).
21) VOLUME Key – adjusts the receiver/speaker volume when on a call; adjusts the ringer
volume when on-hook.
22) Message Waiting Indicator – a bright red indicator is lit when messages are waiting.
23) Microphone – used for hands-free (speakerphone) calling; located under the right front
of the telephone.
24) Handset Jack – a jack on the left side of the telephone connects to the included
handset.
25) Headset Jack – a jack on the right side of the telephone connects to an optional
standard headset.
To Next Page
Loading...
