Terex MAC 25 User Manual

MAC-25 OFFSET HEAD BOTTOM POSITION LOAD CHART - 10 DE
G
LMI DUT
Y
203
COUNTERWEIGHT ON REAR OF CRANE - SPRING LOCKOUTS ENGAGED
S.W.L. ARE BASED ON 66.7% STABILITY & STRENGTH
S.W.L IN KILOGRAMS FOR SLEW ANGLES OF 10 DEGREES OR LESS EITHER
- S.W.L. ABOVE BOLD RED LINE ARE STRUCTURAL
SIDE OF STRAIGHT AHEAD (INDICATED BY GREEN LED ON DASH).
S.W.L. ARE BASED ON FIRM LEVEL GROUND (1% SLOPE (0.6 DEG) AS PER AS1418.5)
BOOM ANGLE - UNDEFLECTED (REF.)
WITH TYRES INFLATED AS PER NOTES
NOTE :
VALUES IN BRACKETS ( ) ARE ACTUAL RADIUS AT ZERO DEG. BOOM ANGLE.
LIFT & CARRY - THE S.W.L. SHALL BE CARRIED WITH THE MINIMUM BOOM LENGTH & AS
CLOSE TO THE GROUND AS POSSIBLE AT SPEEDS NOT IN EXCESS OF 0.4 M/SEC (1.44 KM/HR)
Radius BOOM PIVOT TO EDGE OF SHEAVE - THIRD BOOM RETRACTED THIRD BOOM EXTENDING
in (metres) (metres)
Metres 6.86 7.00 7.50 8.00 8.50 9.00 9.50 10.00 10.50 11.00 11.50 12.00 12.50 13.00 13.50 14.00 14.50 15.06 15.50 16.00 16.50 17.00 17.50 18.00 18.50 19.16
1.4
8400 8400 8400 8400 8400 8400
55 56 59 61 63 65
2.0
8400 8400 8400 8400 8400 8400 8400 8400 8400
WINCH S.W.L.
49 50 53 56 58 60 62 64 65 SINGLE PART 4200
2.5
8400 8400 8400 8400 8400 8400 8400 8400 8400 8400 8400 TWO PARTS 8400
43 44 48 51 54 56 58 60 62 63 65
3.0
8400 8400 8400 8400 8400 8400 8400 8400 8400 8400 8400 8400 8400 8400
36 38 43 46 50 52 55 57 59 60 62 63 64 65
3.5
8400 8400 8400 8400 8400 8400 8400 8400 8400 8400 8400 8400 8400 8400 8400 8400
27 30 36 41 45 48 51 53 55 57 59 60 62 63 64 65
4.0
8400 8400 8400 8400 8400 8400 8400 8400 8400 8400 8400 8400 8400 8400 8400 8400 8400 8400
(4.2) 19 29 35 40 44 47 50 52 54 56 58 59 60 62 63 64 65
5.0
8400 8400 8400 8400 8400 8400 8400 8400 8400 8400 8400 8400 8400 8350 8350 8350 8350 8350 8350 8250 8100 8000
(4.3) (4.8) 18 27 33 38 41 44 47 49 52 53 55 57 58 59 61 61 62 63 64 65
6.0
7950 7100 6850 6850 6850 6800 6800 6800 6750 6750 6750 6750 6700 6700 6700 6750 6750 6800 6850 6850 6900 6500 5850
(5.3) (5.8) 17 25 31 36 39 42 45 47 49 51 53 54 56 57 58 59 60 61 62 63 64
7.0
6400 5800 5650 5650 5600 5600 5600 5600 5600 5550 5550 5550 5550 5550 5600 5650 5650 5700 5700 5750 5800
(6.3) (6.8) 16 24 30 34 37 40 43 45 47 49 51 52 54 55 56 57 59 59 61
8.0
5300 4850 4700 4700 4700 4700 4700 4700 4700 4650 4650 4700 4750 4750 4800 4800 4850 4850 4900
(7.3) (7.8) 15 23 28 33 36 39 41 44 46 48 49 51 52 53 55 56 57
9.0
4450 4100 4000 4000 4000 4000 4000 4000 4000 4000 4050 4050 4100 4150 4150 4200 4200
(8.3) (8.8) 14 22 27 31 35 37 40 42 44 46 48 49 51 52 53
10
3800 3550 3450 3450 3450 3450 3450 3450 3500 3550 3550 3600 3600 3650 3650
(9.3) (9.8) 14 21 26 30 34 36 39 41 43 45 46 48 50
11
3300 3050 3000 3000 3000 3000 3050 3100 3100 3150 3150 3200 3200
(10.3) (10.8) 13 20 26 29 32 35 37 40 42 43 45
12
NOTE : WEIGHT OF HOOKS, BLOCKS & OTHER 2850 2650 2600 2650 2650 2700 2750 2750 2800 2800 2850
LOAD HANDLING DEVICES SHALL BE ADDED (11.3) (11.8) 14 20 24 28 31 34 36 39 41
13
TO THE WEIGHT OF THE LOAD 2450 2350 2350 2350 2400 2450 2450 2500 2500
(12.4) (12.8) 12 19 24 27 30 33 36
14
2250 2150 2100 2150 2200 2200 2250
(13.3) (13.8) 12 18 23 27 30
15
2050 1950 1950 1950 2000
(14.3) (14.8) 12 18 24
16.4
1850 1800 1700
(15.3) (15.8) (16.4)
37/66 MXC1347B COUNTERWEIGHT - REAR MAC 25 OFFSET HEAD BOTTOM POSITION AT 10 DEG

Terex MAC 25 Specifications

General

Brand	Terex
Model	MAC 25
Category	Construction Equipment
Language	English