Terex MAC 25 - Page 60

MAC-25 OFFSET HEAD TOP POSITION LOAD CHART - 40 DEG
LMI DUTY
304
STANDARD 1500 KG COUNTERWEIGHT (PLMXF2009) + EXTRA 2160 KG COUNTERWEIGHT (PLMXF2019-) ON REAR OF CRANE - SPRING LOCKOUTS ENGAGE
D
RC IN KILOGRAMS FOR SLEW ANGLES OF GREATER THAN 10 DEGREES UP TO 40
RC ABOVE BOLD RED LINE ARE STRUCTURAL
DEGREES EITHER SIDE OF STRAIGHT AHEAD (INDICATED BY RED LED ON DASH).
RC ARE BASED ON FIRM LEVEL GROUND (1% SLOPE (0.6 DEG) AS PER AS1418.5)
BOOM ANGLE - UNDEFLECTED (REF.)
WITH TYRES INFLATED AS PER NOTES
NOTE :
VALUES IN BRACKETS ( ) ARE ACTUAL RADIUS AT ZERO DEG. BOOM ANGLE.
LIFT & CARRY - THE RC SHALL BE CARRIED WITH THE MINIMUM BOOM LENGTH & AS
RC ARE BASED ON 66.6% STABILITY & STRENGTH CLOSE TO THE GROUND AS POSSIBLE AT SPEEDS NOT IN EXCESS OF 0.4 m/s (1.44 km/h)
Radius BOOM PIVOT TO EDGE OF SHEAVE - THIRD BOOM RETRACTED THIRD BOOM EXTENDING
in (metres) (metres)
Metres 6.82 7.00 7.50 8.00 8.50 9.00 9.50 10.00 10.50 11.00 11.50 12.00 12.50 13.00 13.50 14.00 14.50 15.02 15.50 16.00 16.50 17.00 17.50 18.00 18.50 19.12
1.4
8400 8400 8400 8400 8400 8400 8400
52 53 56 58 60 62 64
2.0
8400 8400 8400 8400 8400 8400 8400 8400 8400 8400
WINCH RC
45 47 50 53 56 58 60 61 63 64 SINGLE PART 4200
2.5
8400 8400 8400 8400 8400 8400 8400 8400 8400 8400 8400 8400 TWO PARTS 8400
39 41 45 49 52 54 56 58 60 61 63 64
3.0
8400 8400 8400 8400 8400 8400 8400 8400 8400 8400 8400 8400 8400 8350 8100
32 34 40 44 47 50 53 55 57 58 60 61 63 64 65
3.5
8400 8400 8400 8400 8400 8400 8400 8400 8400 8400 8400 8400 8100 7800 7550 7350 7100
24 27 33 38 42 46 49 51 53 55 57 59 60 61 62 63 64
4.0
8400 8400 8400 8400 8400 8400 8400 8400 8400 8400 8150 7850 7600 7300 7100 6850 6650 6450 6350
(4.1) 16 26 32 37 41 45 47 50 52 54 56 57 59 60 61 62 63 64
5.0
8400 8400 8400 8400 8400 8400 8100 7750 7500 7200 6950 6700 6450 6250 6050 5900 5700 5600 5500 5400 5300 5200 5100
(4.3) (4.8) 15 24 30 35 39 42 45 48 50 52 53 55 56 58 59 60 61 62 63 64 65
6.0
8400 7500 7200 7200 7100 6800 6550 6300 6100 5950 5750 5550 5400 5200 5050 5000 4900 4800 4750 4650 4600 4500 4400
(5.3) (5.8) 14 23 29 34 37 40 43 46 48 50 51 53 54 56 57 58 59 60 61 62 63
7.0
6800 6150 5950 5900 5850 5600 5400 5250 5100 4950 4800 4650 4550 4450 4400 4300 4250 4200 4100 4050 4000
(6.3) (6.8) 14 22 28 32 36 39 41 44 46 48 50 51 53 54 55 56 57 58 59
8.0
5650 5150 5000 5000 4900 4700 4550 4400 4300 4150 4050 4000 3950 3900 3800 3750 3700 3650 3600
(7.3) (7.8) 13 21 27 31 34 37 40 42 44 46 48 49 51 52 53 55 56
9.0
4750 4400 4250 4250 4150 4000 3850 3750 3650 3600 3550 3500 3450 3400 3400 3350 3300
(8.3) (8.8) 12 20 25 30 33 36 39 41 43 45 46 48 49 51 52
10
4050 3750 3650 3650 3550 3400 3300 3250 3200 3200 3150 3100 3100 3050 3000
(9.3) (9.8) 12 19 25 29 32 35 37 40 42 43 45 47 48
11
3500 3250 3150 3150 3050 3000 2950 2900 2850 2850 2800 2800 2750
(10.3) (10.8) 12 19 24 28 31 34 36 38 40 42 44
12
NOTE : WEIGHT OF HOOKS, BLOCKS & OTHER 3050 2850 2750 2800 2700 2650 2650 2600 2550 2550 2500
LOAD HANDLING DEVICES SHALL BE ADDED (11.3) (11.8) 12 18 23 27 30 33 35 37 40
13
TO THE WEIGHT OF THE LOAD 2650 2550 2500 2500 2450 2400 2400 2350 2300
(12.3) (12.8) 11 18 22 26 29 32 35
14
2400 2300 2300 2300 2200 2200 2150
(13.3) (13.8) 11 17 22 25 29
15
2200 2100 2100 2050 2000
(14.3) (14.8) 10 17 22
16.45
2000 1950 1850
(15.3) (15.8) (16.5)
57/66 MXC1347B 16.6t RAW COUNTERWEIGHT - REAR MAC 25 OFFSET HEAD TOP POSITION - 40 DEG