Safety
2-3
SAFETY
The machine should be properly operated and maintained to keep it
in a safe, efficient operating condition. Be sure that all controls are
free of mud, grease, or other matter that might cause slips hazardous
to the operator, serviceman, or other personnel or equipment. Report
all malfunctions to those responsible for maintenance, and, do not
operate the equipment until corrected. Normal service or mainte-
nance performed as required can prevent unexpected and unneces-
sary downtime.
This operations manual describes general inspections, servicing and
operation with the normal safety precautions required for normal ser-
vicing and operating conditions. It is not a guide however, for other
than normal conditions or situations, and therefore, servicemen and
operators must be safety conscious and alert to recognize potential
servicing or operating safety hazards at all times, and take, necessary
precautions to assure safe servicing and operation of the machine.
These machines are equipped with cylinders containing com-
pressed nitrogen gas. Transportation of these machines by any
method may require a special permit from the appropriate
authority of the country involved. Consult your dealer for
details.
These machines use a solution of high purity urea. Avoid pro-
longed or repeated contact with skin. After handling, always
wash hands thoroughly with soap and water. In case of contact
with eyes, rinse immediately with water. If large quantities are
ingested or irritation persists seek medical attention immedi-
ately.
All information, illustrations and specifications contained in this publi-
cation are based on the latest product information available at the
time of publication. The right is reserved to make changes at any time
without notice.
Continuing improvement and advancement of the design may cause
changes to your machine which may not be included in this publica-
tion. Each publication is reviewed and revised, as required, to update
and include these changes in later editions.
This operations manual contains lubrication and routine servicing
instructions, most of which can be performed in the field. Mainte-
nance manuals containing repair/ rebuild procedures can be obtained
from your dealer.
CAUTION
WARNING
To Next Page
