Safety
2-5
The protection offered by the roll over and falling object pro-
tective structure may be impaired if it has been subjected to
any modification or damage. Unauthorized modification will
void certification.
Articulation and Oscillation Lock
• Always connect the steering and oscillation lock bar before work-
ing in the articulation area, before lifting the machine and during
transportation of this machine by trailer/vessel.
• Always disconnect the steering and oscillation lock bar and
secure in the 'Stowed' position before operating the machine. The
machine would not be free to steer otherwise.
Machine Lifting Precautions
• Prior to lifting, the machine should be parked on a level surface,
wheels blocked, steering and oscillation lock bars connected.
• The machine should be lifted using a spreader bar if possible. Lift
using FOUR slings from the lifting points provided at the bumper
end of the front chassis and at the rear of the body.
NOTICE: Be aware that this machine is free to oscillate if not lifted
correctly. If in any doubt contact your dealer for further information.
Machine Tie Down Precautions
• The machine should be secured at the tie down points located at
the bumper end of the front chassis, the front face of the trailer
chassis and the tow pin at the rear of the trailer chassis.
To Next Page
