NORMAL OPERATION
During normal operation, Powerwall is completely controlled by the inverter. If Powerwall and the
inverter are installed correctly, the inverter can turn on Powerwall, begin communications, then
begin to process power commands. See the inverter manual for further configuration instructions.
Warning: Do not operate Powerwall unless all covers are in place.
Warning: Do not disconnect anything from or add anything to Powerwall.
Caution: Do not try to communicate with Powerwall using third party tools or diagnostics
between Powerwall and the inverter.
Caution: Do not lean on, stack anything on top of, or hang anything from Powerwall or the
conduit.
UNINTENDED OPERATION
Powerwall is not user serviceable and must be repaired by a Tesla Energy Certified Installer who
has been trained by Tesla. If any problems arise, refer to Troubleshooting on page 28 before
contacting the Tesla Energy Authorized Reseller who sold the Powerwall unit.
POWERWALL CARE
Keep the top edge of Powerwall clear of leaves and other debris if installed outside, to maintain
optimal
airflow.
To clean Powerwall, use a soft, lint-free cloth. The cloth can be dampened with only water if
needed. It should not be dripping.
Caution: Do not use cleaning solvents to clean Powerwall.
Operation and Care
Operation and Care 27
To Next Page
Loading...
