TESTO 320 - CO undiluted

6 Using the product
50
Options:
> [Options] → Clipboard: data is saved to the clipboard.
> [Options] → Delete clipboard: any data saved to the clipboard
is deleted.
> [Options] → Save: the measured values are saved in a record.
> [Options] → Address/Location: the Address/Location folder is
opened.
4.
6.2.7. CO undiluted
Call up function:
✓ A multi-hole probe (0554 5762) should be connected.
> [ ] → Measurement options → [OK] → CO undiluted →
[OK].
Carrying out the measurement:
1. Start measurement: [ ]
- The measured value is displayed.
2. End measurement: [ ]
Options:
> [Options] → Clipboard: data is saved to the clipboard.
> [Options] → Delete clipboard: any data saved to the clipboard
is deleted.
> [Options] → Save: the measured values are saved in a record.
6.2.8. Smoke number/HCT
Calling up the function:
> [ ] → Measurement options → [OK] → Smoke
number/HCT→ [OK].
The parameters Smoke No. and Oil depos. are only
available for oil fuels.
Determine smoke tester no./smoke nos./oil depos. with the
smoke pump and enter manually:
1. Select parameter → [Edit].
2. Enter data or values → [OK].
1.888.610.7664 info@Testo-Direct.com
www.Testo-Direct.com