Testomat 808 - Fuses; Inputs DEL. EXT. and STOP; Terminal Block

Installation
19
Inputs DEL. EXT. and STOP
Please refer to the section entitled “Description of the signal inputs”
on page 23 for a description of the inputs “Delete externally” and
“Stop” .
Terminal block
Please refer to the sections entitled “Connecting the mains voltage”
on page 20 and “Connecting the inputs and outputs” on page 21 for a
description of the terminal block .
Fuses
The following fuses can be found on the base circuit board.
No.
Designation
Function
Comment

F1
Relay protection fuse
4 A

F2
Primary fuse
230 V / 0.1 A
115 V / 0.2 A
24 V / 1 A

F3
Secondary fuse
1 A
Please refer to the section entitled “Testomat
®
808 spare parts and
accessories” on page 41 for the article numbers when reordering fus-
es.