Testomat 808 - Technical data

Technical data
43
Technical data
Power supply:
(24 / 115)* 230V, 50 – 60 Hz
Instrument protection 230 – 240 V: T0.1 A
Instrument protection: 115 V: T0.2 A
Instrument protection: 24 V: T0.8 A
Mains protection for
consumers:
max. 4 A (n , l)
Power consumption:
max. 16 VA, without external load
Protection class:
I
Degree of protection:
IP 54
Conformity:
EN 61000-6-2, EN 61000-6-4,
EN 61010-1
Ambient temperature:
10 - 40°C
Measuring range:
See the section entitled "Performance spec-
ifications"
Current interface:
Output of defined values (5, 8, 11, 14, 17,
20 mA) for displaying status and error mes-
sages, max. load 500 Ohms
Contact load
Relay
230V / 4A AC ohm resistive load
Dimensions:
W x H x D = 364 x 314 x 138 mm
Weight:
4,350 g
Mains water supply
Operating pressure:
0.3 – 1 bar / 0,3 x 10
5
to 4 x 10
5
Pa (use
measuring chamber with art. no. 37616!)
1 - 4 bar / 1 x 10
5
to 4 x 10
5
Pa depending
on design
(a pressure reducer (special accessories)
should be used from 4 to 8 bar range)
Water inlet:
Opaque hose with 6 mm external diame-
ter/4 mm internal diameter
Water outlet:
Opaque hose with 6 mm external diame-
ter/4 mm internal diameter
Water temperature:
10 to 40°C
We reserve the right to make technical changes without notice in
the interest of constantly improving our products!