Texas Instruments bq78350-R1 Technical Reference

www.ti.com 0x55 ChargingStatus
139
SLUUBD3D–September 2015–Revised September 2018
Submit Documentation Feedback
Copyright © 2015–2018, Texas Instruments Incorporated
SBS Commands
SBS
Cmd
Name
Access
Protocol Type Min Max Default Unit Note
SE US FA
0x54 OperationStatus() — R R Block H4
0x00000
000
0xFFFF
FFFF
— —
17.50 0x55 ChargingStatus
This command returns the ChargingStatus() flags. For a description of each bit flag, see the
ManufacturerAccess() version of the same command in Section 17.2.
SBS
Cmd
Name
Access
Protocol Type Min Max Default Unit Note
SE US FA
0x55 ChargingStatus() — R R Block H4
0x00000
000
0xFFFF
FFFF
— —
17.51 0x56 GaugingStatus
This command returns the GaugingStatus() flags. For a description of each bit flag, see the
ManufacturerAccess() version of the same command in Section 17.2.
SBS
Cmd
Name
Access
Protocol Type Min Max Default Unit Note
SE US FA
0x56 GaugingStatus() — R R Block H4
0x00000
000
0xFFFF
FFFF
— —
17.52 0x57 ManufacturingStatus
This command returns the ManufacturingStatus() flags. For a description of each bit flag, see the
ManufacturerAccess() version of the same command in Section 17.2.
SBS
Cmd
Name
Access
Protocol Type Min Max Default Unit Note
SE US FA
0x57 ManufacturingStatus() — R R Block H4
0x00000
000
0xFFFF
FFFF
— —
17.53 0x58 AFEStatus
This command sets or gets the configuration of the companion AFE (address 0x00).
SBS
Cmd
Name
Access
Protocol Type Min Max Default Unit Note
SE US FA
0x58 AFEStatus() — R R Block H1 0x00 0xFF — —
17.54 0x59 AFEConfig
This read/write-block function sets or gets the configuration of the companion AFE (address 0x01 to
0x0B).
SBS
Cmd
Name
Access
Protocol Type Min Max Default Unit Note
SE US FA
0x59 AFEConfig() — R R String H4 — — — —
17.55 0x5A AFEVCx
This command returns the cell voltage measurement data of the companion AFE (address 0x0C to 0x29)
on ManufacturerBlockAccess() or ManufacturerData().

Texas Instruments bq78350-R1 Specifications

General

Brand	Texas Instruments
Model	bq78350-R1
Category	Controller
Language	English