www.ti.com
0x00 ManufacturerAccess() and 0x44 ManufacturerBlockAccess()
109
SLUUBD3D–September 2015–Revised September 2018
Submit Documentation Feedback
Copyright © 2015–2018, Texas Instruments Incorporated
SBS Commands
TS1 (Bit 12): Open Thermistor – TS1 Failure
1 = Detected
0 = Not Detected
AFE_XRDY (Bit 11): Companion bq769x0 AFE XREADY Failure
1 = Detected
0 = Not Detected
AFE_OVRD (Bit 10): Companion bq769x0 AFE Override Failure
1 = Detected
0 = Not Detected
AFEC (Bit 9): AFE Communication Failure
1 = Detected
0 = Not Detected
AFER (Bit 8): AFE Register Failure
1 = Detected
0 = Not Detected
DFETF (Bit 7): Discharge FET Failure
1 = Detected
0 = Not Detected
CFETF (Bit 6): Charge FET Failure
1 = Detected
0 = Not Detected
VIMR (Bit 5): Voltage Imbalance While Pack Is at Rest Failure
1 = Detected
0 = Not Detected
SOT (Bit 4): Safety Overtemperature Cell Failure
1 = Detected
0 = Not Detected
SOCD (Bit 3): Safety Overcurrent in Discharge
1 = Detected
0 = Not Detected
SOCC (Bit 2): Safety Overcurrent in Charge
1 = Detected
0 = Not Detected
SOV (Bit 1): Safety Cell Overvoltage Failure
1 = Detected
0 = Not Detected
SUV (Bit 0): Safety Cell Undervoltage Failure
1 = Detected
0 = Not Detected
17.2.37 ManufacturerAccess() 0x0053 PFStatus
This command returns the PFStatus() flags on ManufacturerBlockAccess() or ManufacturerData().
To Next Page
Loading...