Texas Instruments bq78350-R1

www.ti.com Introduction
55
SLUUBD3D–September 2015–Revised September 2018
Submit Documentation Feedback
Copyright © 2015–2018, Texas Instruments Incorporated
Cell Balancing
7.1.1 Cell Balancing Configuration
Class Subclass Name Type Min Max Default Unit
Charge Algorithm Cell Balancing Config Cell Balance
Threshold
I2 0 5000 3900 mV
Charge Algorithm Cell Balancing Config Cell Balance Window I2 0 5000 100 mV
Charge Algorithm Cell Balancing Config Cell Balance Min U1 0 255 40 mV
Charge Algorithm Cell Balancing Config Cell Balance Interval U1 0 255 20 s
Class Subclass Name Format Size in Bytes Min Max Default Unit
Settings Configuration
Balancing
Configuration
Hex 1 0x00 0xFF 0x01 —
7 6 5 4 3 2 1 0
RSVD RSVD RSVD RSVD RSVD RSVD RSVD CB
RSVD (Bits 7–1): Reserved
CB (Bit 0): Cell balancing
1 = Enabled (default)
0 = Disabled