Texas Instruments TI-83-Plus User Manual

Chapter 2: TI-83 Plus Specific Information 61
TI-83 Plus Developer Guide Third Release May 28, 2002
CpyO2ToFPST
Copies nine bytes in OP2 to FPST.
CpyO2ToFPS1
Copies nine bytes in OP2 to FPS1.
CpyO2ToFPS2
Copies nine bytes in OP2 to FPS2.
CpyO2ToFPS3
Copies nine bytes in OP2 to FPS3.
CpyO2ToFPS4
Copies nine bytes in OP2 to FPS4.
CpyO3ToFPST
Copies nine bytes in OP3 to FPST.
CpyO3ToFPS1
Copies nine bytes in OP3 to FPS1.
CpyO3ToFPS2
Copies nine bytes in OP3 to FPS2.
CpyO3ToFPS3
Copies nine bytes in OP3 to FPS3.
CpyO5ToFPS1
Copies nine bytes in OP5 to FPS1.
CpyO5ToFPS3
Copies nine bytes in OP5 to FPS3.
CpyO6ToFPST
Copies nine bytes in OP6 to FPST.
CpyO6ToFPS2
Copies nine bytes in OP6 to FPS2.
• Copies nine bytes from a FPS entry to RAM.
CpyStack
If this routine is to be used, it is recommended that you create this
routine in your APP/ASM.
;
; input: C = offset from (FPS) to start of 9
; byte entry to copy. max = 252
;
; ex:C=9 ->FPST
; 18 -> FPS1
;
; DE = pointer to 9 bytes of RAM to copy to
;
;
CpyfrFPS:
LD HL,(FPS)
B_CALL CpyStack
CpyFPST
Copies nine bytes from FPST to DE.
CpyFPS1
Copies nine bytes from FPS1 to DE.
CpyFPS2
Copies nine bytes from FPS2 to DE.
CpyFPS3
Copies nine bytes from FPS3 to DE.
CpyTo1FPST
Copies FPST to OP1.
CpyTo1FPS1
Copies FPS1 to OP1.

Texas Instruments TI-83-Plus Specifications

General

Display Type	LCD
Display Resolution	96 x 64 pixels
Power Source	4 AAA batteries
Programming Language	TI-BASIC, Z80 Assembly
Backup Power	CR1616 or CR1620 lithium battery
RAM	24 KB
Processor	Zilog Z80
Weight	7.4 oz (210 g) with batteries
Dimensions	7.3 x 3.5 x 0.9 inches