INS760EN-7 13/91
+00:10 WiFi LED Flashes
Open wifi search on
mobile
Find SmartCom Host
AP
Enter SmartCom
passphrase from label
Select Home wifi
network and enter
password
+00:05 WiFi LED goes off
+00:05 WiFi LED goes solid
+00:15 WiFi LED fast continuos flash
Generate App code
from panel
+00:15
Cloud LED and then WiFi LED
solid
LED Indications
The Cloud LED will be on solid when connected to our servers and all
information is correct to enable bi-directional communication.
The LAN or WiFi LED will be on solid when connected to the network.
The Lan LED will be illuminated when connected by ethernet cable.
V2 The Power LED should be on solid
V3 the light will not illuminate.
If the Cloud LED is flashing, please check that the system is configured
correctly. If symptoms persist and the light does not go solid please contact
Tech Support.
When a firmware upgrade is taking place all LED’s may flash sporadically,
this is normal.
For further infomration on the status of LED's pleae see Appendix C
To Next Page
Loading...
Need help?
General
