Textron Bell 212 - 5-13. 300 HOURS - PART B

BHT-212-MM-1
5-00-00
26 JUN 2013 Rev. 14 Page 79
Export Classification C, ECCN EAR99
SCHEDULED INSPECTIONS
5-13. 300 HOURS — PART B
DATA REFERENCE INSPECTION TASK DESCRIPTION
INITIAL
MECH OTHER
DATE: __________________W.O. _____________________
FACILITY: __________________________________________
HELICOPTER S/N: ___________________________________
REGISTRY NO.: _____________________________________
TOTAL TIME:_______________________________________
SIGNATURE:________________________________________
NOTE
For helicopters on the Part B inspection program,
accomplish the following checks each 300 hours of
flight operation.
GENERAL
Each listed inspection item or maintenance function is to be
performed in accordance with the chapter specified.
PRELIMINARY REQUIREMENTS
1. All work accomplished during inspection shall be recorded
in helicopter maintenance records.
2. Remove all panels, fairings, and cowlings required to
satisfactorily carry out the inspection.
3. Perform a complete 25 hour/30 day — Part B inspection.
AFTER COMPLETION OF INSPECTION
1. Reinstall all panels, fairings, and cowlings removed during
inspection.
2. Carry out a ground run and leak check prior to releasing
the helicopter back to service.