BHT-212-MM-1
5-00-00
26 JUN 2013 Rev. 14 Page 29
Export Classification C, ECCN EAR99
5-9. 100 HOURS/12 CALENDAR MONTHS — PART A
DATA REFERENCE INSPECTION TASK DESCRIPTION
INITIAL
MECH OTHER
DATE: __________________W.O. _____________________
FACILITY: __________________________________________
HELICOPTER S/N: ___________________________________
REGISTRY NO.: _____________________________________
TOTAL TIME:_______________________________________
SIGNATURE:________________________________________
For helicopters on the Part A inspection program,
accomplish each 100 hours of flight operation or after
12 calendar months, whichever comes first.
GENERAL
1. Each listed inspection item or maintenance function is to
be performed in accordance with the referenced maintenance
manual, chapter specified, or BHT-212-CR&O manual.
2. Refer to Pratt & Whitney Canada PT6T-3/-3B Maintenance
Manual for engine inspection requirements.
3. Record all work accomplished during inspection in the
helicopter maintenance record.
4. Check helicopter records for recorded discrepancies.
5. Accomplish complete Daily Inspection — Part A scheduled
inspection program.
Paragraph 5-16 6. Review special inspections and perform any special
inspection required.
Chapter 4 7. Replace all finite life components that have completed
published operating limitations.
To Next Page
Loading...
