Textron Bell 212 - 5-35. EACH 300 HOURS;3 MONTHS OF DRIVESHAFT OPERATION

BHT-212-MM-1
5-00-00
Export Classification C, ECCN EAR99
SPECIAL INSPECTIONS
5-35. EACH 300 HOURS/3 MONTHS OF DRIVESHAFT OPERATION
DATA REFERENCE INSPECTION TASK DESCRIPTION
INITIAL
MECH OTHER
DATE: __________________W.O. _____________________
FACILITY: __________________________________________
HELICOPTER S/N: ___________________________________
REGISTRY NO.: _____________________________________
TOTAL TIME:_______________________________________
SIGNATURE:________________________________________
NOTE
Accomplish each 300 hours or 3 months of driveshaft
operation, whichever occurs first.
Chapter 12
Chapter 63
BHT-212-CR&O
MAIN DRIVESHAFT 212-040-005-001 AND -011
1. Remove main driveshaft assembly.
2. Visually inspect and lubricate.
ASB 212-94-93 3. Check date of manufacture of boot assembly
(212-040-176-101).
26 JUN 2013 Rev. 14 Page 151/152