BHT-212-MM-1
5-00-00
Export Classification C, ECCN EAR99
5-33. FIN SPAR CAP INSPECTION EVERY 300 HOURS
DATA REFERENCE INSPECTION TASK DESCRIPTION
INITIAL
MECH OTHER
DATE: __________________W.O. _____________________
FACILITY: __________________________________________
HELICOPTER S/N: ___________________________________
REGISTRY NO.: _____________________________________
TOTAL TIME:_______________________________________
SIGNATURE:________________________________________
Accomplish inspection of fin spar caps P/N
212-030-125-001 and 212-030-447-101 every 300
flight hours.
This special inspection is not required if fin spar cap
P/N 212-030-125-001 has not been modified by
retrofit kit 212-704-087 (ASB 212-01-73-1).
This special inspection is not required if fin spar cap
PN 212-030-447-117 has been installed as original
equipment or in accordance with TB 212-00-184.
Fin spar cap P/N 212-030-447-117 can be identified
by the presence of decals that identify the
cold-worked holes.
FIN SPAR CAP 212-030-125-001 AND 212-030-447-101
ASB 212-00-110 1. Carry out 300 hour recurring inspection in accordance with
applicable section of ASB 212-00-110.
2. Any discrepancies (cracks, corrosion, de-bonding, or other
damage) are to be reported to Product Support Engineering
before further flight.
26 JUN 2013 Rev. 14 Page 147/148