Textron Bell 212 - 5-18. DAILY OR EACH 10 HOURS OF FLIGHT OPERATION, WHICHEVER OCCURS FIRST UNTIL 250 HOURS

BHT-212-MM-1
5-00-00
26 JUN 2013 Rev. 14 Page 109
Export Classification C, ECCN EAR99
SPECIAL INSPECTIONS
5-18. DAILY OR EACH 10 HOURS OF FLIGHT OPERATION, WHICHEVER OCCURS FIRST UNTIL
250 HOURS
DATA REFERENCE INSPECTION TASK DESCRIPTION
INITIAL
MECH OTHER
DATE: __________________W.O. _____________________
FACILITY: __________________________________________
HELICOPTER S/N: ___________________________________
REGISTRY NO.: _____________________________________
TOTAL TIME:_______________________________________
SIGNATURE:________________________________________
NOTE
Accomplish daily or each 10 hours flight operation,
whichever occurs first until 250 hours, on
transmission with affected gears with 50 hours or
more.
Chapter 63 and
ASB 212-89-54
SPIRAL BEVEL GEAR 204-040-701-103
— Inspect
NOTE
This inspection is only applicable to transmissions/
helicopters with the spiral bevel gears, shown in
Figure 5-5, installed.
1. Remove and inspect the transmission internal sump filter
for metal contamination. If metal contamination is evident, notify
Product Support Engineering of spiral bevel gear serial number,
hours, and type of contamination.
2. Every 50 hours (until 250 hours), visually inspect spiral
bevel gear.
a. Remove quill pad cover (204-040-174-001) or rotor
brake quill from transmission.